|
|
Capture Modes
Logic Analyzer
- up to 20s capturing time with 8 Channels of Logic Analyer
- maximum 25 MS/s
- maximum 25 MS/s
Terminal
- Solitary capturing of the 2 serial UART Channels,
- just us as serial capturing device.
- just us as serial capturing device.
Logic + Aux
- up to 20s parallel capturing of all Channels Logic + all Auxiliary Channels
- Logic with 10 MS/s
- Triggers are fired
- Logic with 10 MS/s
- Triggers are fired
Simulation
- up to 60 minutes capturing of all all Auxiliary Channels
- full Triggers and Action on all Channels
- multi Run Mode
- full Triggers and Action on all Channels
- multi Run Mode
FAQ
No. 15 V DC input is only required if you are using one of the internal power supplies.
The software is open source under LGPL and can be downloaded for free.
Most pins are protected against overvoltage.
All Aux channels have 1 µs accuracy, UART has 1 ms accuracy. Logic channels depend on the sampling rate.
Yes, all extras can be ordered separately.
Yes, measurements can be saved and re-opened later.
Not directly, but you can build the open source software under Linux yourself.